JR Quick Tip: The Zippo Wick

September 2, 2015

1. Remove the Lighter from its casing
2. Unscrew the spring loaded holder
3. Using needle nose pliers, remove all the cotton in the lighter
4. Using the pliers, pull out the old wick
5. Insert the new wick through the top of the lighter
6. Once inserted about an inch, use pliers to pull the rest of the wick through
7. Make sure the top of the wick is level with the outer metal shell
8. Push cotton back into place, and screw in the spring loaded holder
9. Insert Lighter back into casing