J·R University > Cigar School > Lesson 3: How Cigars are Made
Lesson 3: How Cigars are Made

CIGAR SCHOOL

Lesson 3: How Cigars are Made

Sorting

The best wrappers, fillers, and binders are obtained. They are sorted and processed by the following:

  • Color
  • Strength
  • Texture
  • Resiliency
  • Size

Many of these tobaccos can undergo three to four years of preparation before becoming part of a cigar.

After the tobacco is processed, a "blend" is prepared for each cigar roller. A blend is a specific combination of leaves that is used to make a certain brand of cigars. Each blend has a unique flavor that is produced by the types of tobacco leaves used. All the rollers must use the same blend to assure that all the cigars in a brand will taste the same.

Bunching

After the blend is ready, it is formed into a rough cylinder of tobacco called a "bunch." Great care is taken to make sure that the leaves are laid in the bunch uniformly and straight. This ensures that the finished cigar will not have hard or soft spots, which inhibit the cigar from drawing freely or cause it to, burn fast and hot. The most common method used today is called "Spanish Book Filler." If you take an extremely sharp razor and cut a cigar deeply along its entire length, you would see that the layers of tobacco exposed look like the pages of a book. Hence, the term "Book Filler."

Binding

After the bunch is created it is tightly wrapped in a coarse layer of tobacco called a "binder." The binder gives the cigar its structure, shape, and ability to maintain its moisture content. The bound bunch is then placed into a hardwood mold where it gets its particular shape and is open at each end of the cigar.

Molding

Now, the mold contains approximately ten unfinished cigars and is put into a screw-type press along with other molds. Here the cigars will further "mold" into the desired shape. The mold is two pieces, it has a top and bottom. Since it is smaller in diameter than the unfinished cigar to create a compression effect, a crease is noticeable where the upper and lower halves of the mold meet. Periodically, the press is released, the molds are opened, and the cigars are rotated. This time-consuming process is performed to avoid a crease showing through the wrapper on the finished cigar.

Wrapping

After the cigars have been pressed and turned, they are ready for the skilled hands of the rollers. These craftsmen take the fine, silky, elastic wrapper tobacco and stretch it around the molded cigar body. This is the stretching and smoothing process that gives cigars their appealing looks. When a true craftsman applies the wrapper, a small rectangular piece of tobacco is left attached at the head of the cigar. This piece is called a flag. "Flagging" is the process of molding the rectangular piece of wrapper into the head of a fine cigar.

**NOTE**
Many handmade cigars are not "flagged." Instead, they have a circular cap of tobacco at the head. The following are reasons a cap may be used.

  1. The roller of the handmade cigar did not possess the skill necessary to perform the difficult process of flagging.
  2. The cigar is machine made.

It is within the manufacturs legal rights to call this product a handmade cigar!

There are many bundled cigars being sold in this country that are legally defined as handmade, but are not hand made by definition.

Inspecting

The finished cigars are inspected in numerous ways. The cigars are collected from the rollers in bundles of fifty and are labeled with the following information:

  1. "Vitola" or size number.
  2. The name of the "tabaquero" or cigar maker.
  3. The date.

The bundles of fifty are weighed. Every manufacturer knows how much a bundle of a particular size should weigh. If the total weight of a particular bundle of fifty does not fit within a certain allowance, the foreman will know that the roller is making cigars too loose or too tight. Both mistakes are critical. A cigar wrapped too tight is difficult to draw smoke through. A cigar wrapped too loose is hot burning and has soft spots.

Separating Quality

The bundles of fifty that pass the weight criteria are opened and each cigar is felt by hand, from top to bottom, to ensure that the filler has been laid in properly. Cigars failing this critical evaluation are separated and sold as "segundos or "rezagos" (seconds). Cigars with damaged or unsightly wrappers are also separated and reclassified as seconds. All the remaining cigars are put back into bundles of fifty and moved to the "seasoning" or "marriage" rooms.

Storing

In the marriage rooms, the cigars are stored in either cedar bins, cedar drawers, or cedar shelves. The temperature and humidity conditions are kept at an ideal level for the cigars to be stored for three weeks to a year. The longer the cigars remain in the seasoning room, the better they will be. Seasoning and marrying accomplish two critical points in the manufacture of really first-rate cigars. The seasoning or aging process allows the cigars to become firmer because the wrappers lose the excess moisture they had from the wrapping process. As the wrapper dries, it shrinks, compresses, and solidifies the cigar, making the cigar a denser, cooler, and slower-burning finished product. In the seasoning room, the flavors of the cigars blend together, or “marry” with each other and absorb the surrounding flavors of the cigars and the cedar in the room.

Seasoning

The second aspect of the aging process is the intermarrying of the cigars within each bundle and among all the bundles in the seasoning room, regardless of when they were manufactured. Tobacco absorbs the oils and aromas of anything around it. As the cigars remain in this room over a period of time, they absorb each other’s oils and aromas. All of these cigars will then taste and smell alike.

Separating Colors

When the cigars are ready, they are taken out of the seasoning rooms and each bundle is opened and inspected. Each individual cigar is now graded by color. Tobacco can be sorted into 32 shades. Therefore, it is important to have people with good color perception do this job. Their job is to identify and separate the cigars into groups of 25 cigars that have the same wrapper shade. If the process is successful, the 25 cigars that you purchase within a box will appear to have the same color tobacco leaf. Our customers sometimes complain that one or two cigars in their box were "stinker," or not as good as the others. The reason a stinker may be in a box is that 25 different people could have made all 25 cigars, on 25 different days. The only reason the cigars were all in the same box is because they were all the same color. Color may vary from year to year, depending on the amount of rainfall or the conditions of the soil.

Previous Lesson Next Lesson

Contact Us
JRCigars.com2589 Eric LaneBurlington, NC 28677
(888) 574-3576
Follow Us
J-R Cigars
Sign up for JRCigars.com emails
and get updates about weekly
specials, events, & more!
Thanks! An email has been sent to you with directions on how to activate your subscription
Shop With Confidence!
Click to Verify - This site has chosen an SSL Certificate to improve Web site securityMcAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
JR Cigar is an Upfront Merchant on TheFind. Click for info.
*Offers valid while supplies last. JRCigars.com is not responsible for typographical errors. ©1997-2014 JRCigars.com, Inc. All Rights Reserved - 2589 Eric Lane, Burlington NC 27215.WARNING: JRCigars.com does not sell tobacco related products to anyone under the age of 21, nor do we sell cigarettes. Cigars and Tobacco products on this website are not intended for or marketed to anyone under the age of 21.
Rocket Fuel